13
6. Local Priority:
Enable or disable the priority auto switch mode for the HDMI input.
When enabled, the unit will automatically switch to the HDMI input if a live signal is
present.
Note: Only available when the unit is in Receiver Mode.
INFORMATION
2ND LEVEL
3RD LEVEL
Resolution
[Show the current
status of each]
Status
FW Version
IP
LAN MAC
USB MAC
SN
Fan Status
1. Information:
Shows details of the unit’s current status including detected input
resolution, transceiver mode, firmware version, IP address, MAC address, serial
number and fan state.
FACTOR SETTING
2ND LEVEL
3RD LEVEL
ARE YOU SURE?
NO
YES
1. Factory Setting:
Selecting YES will reset the unit’s settings back to their factory defaults.
Note: The transceiver mode will not be reset.
