HDSC12
12
7.3. System Setting
The Third icon from left of OSD menu is the system setting, includes the OSD language
setting, audio listen only,
freeze output image
, VGA setting, output adjustment etc.
Listen
: Audio output only. To resume video output, please press button “MENU”.
VGA setting
: Adjust the H/V signal of VGA input, includes auto adjustment.
Output adjustment
: Adjust H/V size and H/V position of the output. This function is
available only with HDMI and VGA inputs.
8. Firmware Update
HDSC12 supports firmware field-updating, by USB flash disk.
The Operation is:
1)
Copy the file “MT23ATV.bin” to a USB flash disk. (The “MT23ATV.bin” file is
provided/authorized by PTN engineering department)
2)
Plug the USB flash disk to the USB port on SC121D.
3)
Pressing the button “HDMI” on the front panel for 6 seconds or sending RS232
command 0698% for updating, then press the button “OK” on the remote or send
RS232 command 0609% to confirm update. HDSC12 will capture the new firmware
from USB flash disk.
4)
After updating finish, reboot and send the command “
0617%
” to reset to factory
settings.
5)
After reset, reboot again.
Notice:
The name of the update file must be
MT23ATV.bin
.
