KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
24
Examples:
1
、
Transfer signals from an input channel to all output channels: [x]All.
Example: Send
“3All.” to transfer signals from the input 3 to all output channels.
2
、
Transfer all input signals to corresponding output channels respectively: All#.
Example: If this command is carried out, the status of matrix will be: 1->1, 2->2, 3->3,
4-
>4…… 8->8.
3
、
Switch off all the output channels: All$.
Example: After running this command, there will be no signals on all the outputs.
4
、
Switch off the detail feedback command from the COM port: /:MessageOff;
But, it will leave t
he “switch OK” as the feedback, when you switch the matrix.
5
、
Switch on the detail feedback command from the COM port: /:MessageOn;
MOD-OUT-SDI
USER/O/[x]:0201%;
Set the input source of output [x] to
YPbPr
0201%
USER/O/[x]:0202%;
Set the input source of output [x] to
VGA
0202%
USER/O/[x]:0203%;
Set the input source of output [x] to C-
VIDEO
0203%
USER/O/[x]:0804%;
Set the resolution of output [x] to
1280x720P @60Hz
Resolution
Out03 1280x720P
USER/O/[x]:0813%;
Set the resolution of output [x] to
1280x1080P @60Hz
Resolution
Out03 1920x1080P
USER/O/[x]:0824%;
Set the resolution of output [x] to
1024x768 @60Hz
Resolution
Out03 1024x768
USER/O/[x]:0826%;
Set the resolution of output [x] to
1280x1024 @60Hz
Resolution
Out03 1280x1024
USER/O/[x]:0837%;
Set the resolution of output [x] to
1920x1200 @60Hz
Resolution
Out03 1920x1200
GetResolution[x].
Capture output resolution of output [x]
GetVGAPortMode[x
].
Inquire the output status of VGA port
[x]
USER/O/[x]:0617%;
Restore output [x] to factory default.
0617%
MOD-IN-CAT6-4K
AUDIO[X]I[Z].
Select audio source for input [X]
[X] is port number; [Z] stands for audio
source, can be 0 (embedded HDMI
audio) or 1 (analog audio)
AUDIO1I0.
