KanexPro AP3DBL, Руководство пользователя

Страница: 5 / 16

AP3DBL
3
2.2 Rear Panel
Figure 2 e 2 Rear Panel
No. Name Function
1 Power Indicator Turns red when power on.
2 Microphone input port
3-pole captive screw connector for microphone input, the
dial switch in right side is to select the micro input kind,
including 48V (for condenser microphone), MIC (for
dynamic microphone) and LINE (for line audio).
3 Audio Inputs
3.5mm mini jack for stereo audio input, it can be connected
with audio source device such as DVD player.
4 ID Code
16 codes range from 0 to F (hexadecimal), works together
with the PC control software.
5 IR Eye
To connect with the IR receiver, works together with the IR
remote.
6 Power Port To connect with the power adapter (DC24V).
7 2 x RCA
Dual-mono audio input, which can be connected with audio
source device such as a PC.
8 Digital Audio Input
Fiber connector for digital audio input, it can be connected
with a device with fiber port, such as blue-ray player.
9 RS232
3-pole captive screw connector for serial control, it can be
connected with PC (Use a 3-pole captive to 9 pin female D
connector and serial control software) to control AP3DBL.
10 Audio Output
To connect with audio output devices, such as speakers (To
select 70V or 100V depends on the input voltage of the
speakers). COM is for grounding (GND).
3. System Connection
3.1 Usage Precautions
1) Make sure to connect everything before powering on.
2) Speakers must be connected before powering on.