Kanematsu Corporation TactPlus., Руководство пользователя, Страница: 16 / 29

type
type
click
(6)A�er few seconds, the answer will be returned
that connec�on was successful or not.
if it failed, check the security key and try again.
if it s�ll fail, contact to network administrator.
(7)If it successed, the value of printer when se�ng
the driver will be displayed in the field of
“sta�s�c IP address” . Port name will be set
you can also use this field.
automa�cally.when you want to change IP address
click
select
type
select
type
●Select Wi-Fi (Using DHCP<Dynamic Host Configuraton Protocol>)
●Select Wi-Fi (Using sta�c IP address)
(4) When using sta�c IP address, follow the step (8).
Select SSID of Wi-Fi rooter which you want to use.
*SSID is wri�en on rooter itself or manual of rooter.
or contact network administrator.
(5) put “Security Key”
which is written on rooter or manual,
or ask network administrator.
The way to get IP address is to select “Use DHCP” .
A�er choosing, click “8.Connec�on(Printer IP se�ng)” .
* If you want to add PC connec�ng with printer,
follow the step “D. Add second Printer” .
A�er few seconds, the answer will be returned
that connec�on was successful or not.
if failed, check the security key you typed,
and try again.
If s�ll failed, contact network administrator.
Then follow the step “ ③ Add Wi-Fi mode” .
Opera�on Manual
How to connect with Wired LAN/Wi-Fi
Chap.5