Kane KANE3500 Series, Руководство пользователя

Страница: 8 / 24

5. LET-BY and TIGHTNESS TESTING
(only applies to KANE3500-1/UK and KANE3500-2/UK)
Switch the meter ON with no hose connected and wait for the 10 second countdown to finish.
STEP DISPLAY COMMENTS / ACTIONS
1
P 0.00
mbar
Press

to enter the let-by/stabilisation/tightness test sequence.
This test sequence can also be entered via menu/pressure/report/test
2
LET BY?
YES
Use

and

to select ‘YES’ or ‘NO’ then press

.
If ‘NO’ is selected go to straight to step 6, the stabilisation period.
3
CONNECT
P1 10.00
Connect a pressure hose from the ‘+’ connection to the test point.
Manually set the let-by pressure as usual. Press

to start the test.
4
TIME 59
P2 10.00
The let-by test counts down in seconds. Duration can be set via menu.
P2 = ‘live’ pressure reading during the let-by test.
5
P1 10.00
P2 10.00
P1 = pressure at the start of the let-by test.
P2 = pressure at the end of the let-by test. Press

to continue.
6
SET PS
PS 20.00
Manually set the stabilisation pressure as usual.
When PS is correct press

to start the stabilisation period.
7
TIME 59
PS 20.00
The stabilisation test counts down in seconds. Duration is set via
menu.
PS = ‘live’ pressure reading during the stabilisation period.
8
TIME 00
PS 20.00
End of the stabilisation period. Either press  to return to step 6 and
repeat the stabilisation test or press  to continue to the tightness test.
9
SET P3
P3 20.00
Manually adjust the tightness test pressure if necessary.
P3 = pressure at the start of the tightness test. Press

to start the
test.
10
TIME 119
P4 20.00
The tightness test counts down in seconds. Duration is set via menu.
P4 = ‘live’ pressure reading during the tightness test.
11
P3 20.00
P4 20.00
P3 = pressure at the start of the tightness test.
P4 = pressure at the end of the tightness test. Press

to continue
12
LOG 0?
This is the log number of the let-by/stabilisation/tightness test that has
just been completed. Memory capacity is 20 complete tightness tests.
13
PRINTING
=====
To print the complete test press the PRINT key with the bottom of the
instrument pointing at the printer and approximately 150mm apart.
 To exit the test sequence press MENU
 Previously logged tests can be viewed and printed via menu/pressure/report/view/

or

 Previously logged tests can be deleted via menu/pressure/report/delete all/yes/
