OVERVIEW
+/-200 mbar range
8 user selectable scales
Temperature compensated
One button zeroing
Long battery life
Robust case with integrally moulded protective boot
Integral magnets for hands-free operation
GENERAL OPERATION
The meter is controlled using 2 buttons.
The two buttons have dual functions as follows:
ON / OFF
To switch ON press and hold
for 2 seconds until 3200 appears on the
display.
(During this 2 seconds all the segments of the display will be actuated.)
The display will then show the following sequence
1.0
the firmware version
HPA
the units currently set
ZERO
the zeroing sequence
04
03
02
01
00
00.0
the measured value
the meter is now ready for use.
To switch OFF press and hold
until OFF appears on the display. (During this
period the meter will display the units currently set).
ZERO
Press and hold
until ZERO appears on the display. The meter will then do a
zero countdown for a count of 4.