Kane 19291, Руководство пользователя

Страница: 37 / 60

KANE457 manual
Page
37
ANALYSER PROBLEM SOLVING
If any problems are not solved with these solutions, contact us or an authorised repair
center.
Fault symptom Causes / Solutions

Oxygen too high

CO
2
too low

Air leaking into probe, tubing, water
trap, connectors or internal to analyser.
 CO reading (- - - -)  Analyser was stored in a cold
environment and is not at normal
working temperature.

CO sensor needs replacing.

Batteries not holding charge
 Analyser not running on mains
adapter.

Batteries exhausted. A single cell may
be damaged.
 Faster charge not initiated

AC charger not giving correct output.

Wrong charger being used: Must have
9 volt DC output

Fuse blown in charger plug.
 Analyser does not respond to
flue gas
 Particle filter blocked.

Probe or tubing blocked.

Pump not working or damaged with
contaminants.
 Net temperature or Efficiency
calculation incorrect.
 Ambient temperature set wrong during
Automatic Calibration.

Flue temperature readings
erratic

Temperature plug reversed in socket.

Faulty connection or break in cable or
plug.

T flue or T nett displays (-
OC-)

Probe not connected.

Faulty connection or break in cable or
plug.
 Ratio, EFF, X-Air all display (- -
- -)

CO
2
reading is below 2%.
 Analyser just continually beeps  Turn dial back to MENU and press
ENTER

Turn dial back to Tightness and press
ENTER
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.co.uk For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.co.uk