Page
2
English 18259
The Kane 100-1 tests for ambient CO and ambient CO
2
concentrations.
The large display shows 2 readings at a time and all data can be printed via
an optional infrared printer. The printed data can be 'live' data or 'stored
data'.
The KANE 100-1 is controlled using 4 buttons and a rotary dial.
The four buttons (from left to right)
switch the instrument on and off,
print actual or saved data, switch the backlight on and off,
switch the pump on and off, change the top line data display,
save data or temporarily hold or ‘freeze’ the current reading.
The buttons with UP, DOWN and ENTER arrows also change settings
such as date, time, when in menu mode.
The rotary dial changes the display’s 2
nd
line and selects access to the
menu to make changes to the date, time, fuel, etc.
The KANE 100-1 can store up to 255 sets of readings.
The Kane 100-1 is powered by internal re-chargeable NiMH batteries.
The internal battery will power the analyser for about 6Hr, from full
charge.
The KANE 100-1 has a protective rubber sleeve with a magnet for
“hands–free” operation.
NOTE:
Fresh air is referred to in this manual. Sometimes it may be
convenient to use thin flexible tubing (min ID. 3mm.) to supply fresh
outside air, if a tube is used ensure that the inlet is at least 1 meter away
from any possible source of CO
2
such as an open window.
Fuel combustion of any sort may cause high and fluctuating levels of CO
2
over surprisingly large areas. Exhaled breath can easily reach 10,000 to
20,000ppm.
