Material
Swivel joint, handles: Polyamid (PA)
Tablet Cradle: Bio-based plastic
Support arm, Guard arm, screw connections: steel, brass
Clamp: Aluminum profile
Caps, foam rubbers, rubber washers: TPE, EPDM, TPU
Load capacity
Tablet PCs (check dimensions)
Dimensions
for Tablets ~10" - 16"; for stand tubes ø 11-30 mm
width 150-330/430 mm, height 158-280 mm, depth: 20 mm
Cardboard
240 x 120 x 180 mm
Weight
netto: 0.7 kg, brutto: 0.8 kg
TECHNICAL DATA
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
19743-000-55 Rev.3A 03-80-501-00 3/21
19743 Tablet PC holder »Biobased«
- Careful handling maintains the function and safety of the installation
- Regularly check the proper condition of the components; defective parts must be
-
replaced or repaired
- Ensure that the screw and plug connections are firmly seated before use
- Always remove the tablet PC first when carrying out maintenance and cleaning work
- For cleaning and maintenance, use a slightly damp cloth and a non-abrasive
-
cleaning agent
MAINTENANCE
FAULT-FINDING (F) and REPAIR (R)
14. DIMENSIONS
13. ADJUSTMENTS - OVERVIEW
F: Tablet PC sits off-centre
F:
B: Position Guard arm
c
accordingly (Chapter
4
)
F:
B: Tablet PC wider than 330 mm (
9.2
)
F: Tablet PC wobbles
F:
B: Set slider tighter (
7.6
)
F:
B: Clamping too loose, tighten if necessary (
7.7
)
F:
B: Tablet PC is smaller than the minimum dimension of 158 mm (
9.3
)
F: Tablet PC holder wobbles
F:
B: Swivel joint
a
screwed too loosely to the support arm
d
F:
B:
Check wing screw
e
and tighten if necessary (Chapter
2
and
12
)
F:
B: Not properly engaged? Place cradle
b
and engage it correctly (Chapter
5
)
F: Cradle
b
cannot be pulled off swivel joint
a
F:
B: First press lever, then unlock cradle
a
and pull off (Chapter
6
)
F: Support arm
d
does not clamp properly to the stand (wobbles/slips off)
F:
B: Stand tube too small (min. ø 11 mm) or too large (max. ø 30 mm)
F:
B: Replace defective components (rubber insert, clamping screw).
9.1
DEPTH
20 mm
9.2
WIDTH
min.150 mm
max. 330 (430) mm
9.3
HEIGHT
min.158 mm
max. 280 mm
infinitely
variable
10
TILT
from vertical
to horizontal:
90°- stepless
swiveling
11
FORMAT
horizontal - vertical
Portrait - Landscape
90°- stepless swivelling
12.A
DIRECTION
360° all around
12.B
DIRECTION
360° all around
