6
INTRODUCTION
RADAR
DISPLAY
K&K Systems’ Radar Displays are designed to keep both pedestrians and vehicular
traffic safe by reminding motorists of their speed. By using a violation alert flashing
display, the driver’s attention is drawn to the radar display. Radar displays have
been proven to slow motorist down 5 to 10 MPH.
Our 100,000 rated LED lighting unit displays (2)18” amber digits. Our boards
detect speeds from 5-99 MPH. KPH board is available. We install the display in an
aluminum housing that has been powder coat painted white to prevent glare and
rust.
The Radar unit is solar powered with a charge controller and battery power
backup. Optional traffic statistics feedback is available.
BATTERY
BOX
The control box is steel fabricated with lockable rotary latches and hinged at the top to
protect the batteries and the controller. Mounting hardware for lower heights for easier
access is available.
DISPLAY
HOUSING
The display housing is framed in extruded aluminum and has a polycarbonate plastic that
provides U.V. protection along with glare resistance. The message board uses LED (light
emitting diodes) to produce numbers.
POWER
SOURCE
Our products incorporate a battery pack wired for 12V operation, depending on the
requirements of the design. The battery bank is regulated by and protected by a solid-state
charge controller/low voltage disconnect. This prevents gassing and over discharging of
the batteries, which can result in premature failure. A thermal compensation and related
circuitry adjusts the charge rate of the system with variances in temperature.
