7
92798 Cape Arago Hwy, Coos Bay, OR 97420 | 541-888-3517 | Toll Free 1-800-867-6863 | www.kksound.com
12. The next pictures show the posituion of the jig for the center pickup, between G and D strings. Please use a
fresh ball of putty and repeat the procedure as with the first pickup.
13. The next pictures show the posituion of the jig for the low string pickup, between E and A string. Again,
please use fresh putty and repeat the same process as with the previous pickups.
14. Here is how the finished result will look inside the guitar. You
can use a mirror and flashlight to check that the position of the
pickups is correct.
Tip:
The sliding tube along the pickup cable can now be slid about 1-
2 inches from the pickup heads to keep the cables together. Once the
endpin jack is mounted and before it is fully fastened, give it a twist
or two to form a loop in the pickup cables to keep them from touching
the soundboard or bottom of the guitar.