Fuse and Bulb
107
Bulbs on the Headlights
Replace Low Beam Light Bulb
Back view of headlight
Take the replacement of left headlight as example (the
replacement procedure for the bulb of right headlight is the same):
−
Turn off the ignition system and all lights.
−
Open the front engine hood.
−
Remove the front bumper. Use the tool to remove 4 mounting
screws from
headlight
and then remove it.
−
Remove the rubber rear cover
①
of light fixture and then you
may see the holder and hold-down spring, remove the
hold-down spring and then the bulb.
−
Replace it with one
spare bulb of low beam light,
reconnect it
with light holder and install the hold-down spring in place to
recover the rubber rear cover.
−
Reinstall the headlight onto vehicle, tighten 4 mounting screws
and then reinstall the front bumper.
Replace the Turn Signal Light
−
Turn off the ignition system and all lights.
−
Open the front engine hood.
−
Remove the front bumper. Use the tool to remove 4 mounting
screws from
headlight
and then remove it.
−
Turn the back cover
③
counterclockwise to take out the light
holder of the turn signal light.
−
Replace the spare turn signal light bulb and reinstall the turn
signal light.
−
Reinstall the headlight onto vehicle, tighten 4 mounting screws
and then reinstall the front bumper.
Replace the High Beam Light Bulb
−
Turn off the ignition system and all lights.
−
Open the front engine hood.
