Kandi USA 150GKA-2 Series, Руководство пользователя

Страница: 9 / 16

Control Panel (ignition key
and blanket switch
1. Ignition key
2. Cutout
3. Headlamp
4. Turn signal switch
5.
Horn switch
Ignition Key
Turn the ignition key clockwise
to the first gear and braking
indicator will be on.
Engine-start: Electric start
(ignition key is on control panel),
you can start the engine by
turning ignition key clockwise
to the second gear.
Blanket switch
If you want to stop the engine,
you can prose the red blanket
switch until it stops.
Turning lamp switch
Light Switch
Horn Switch
The horn will be switched on if
pressed and off if loosened.
Seat
you can adjust the location of
seat by moving the hand lever
under the cushion. You can
move the hand lever, and then
move to the place necessary
and loosen the hand lever.
Attention: please resume the
location of the hand lever.
Oil tank (cover)
There is a blowhole on oil tank
cover, which should not be
blocked.
Please add the petrol no more
than the neck bottom of oil
feeding mouth when adding.
You must fasten oil tank cover
after finishing adding petrol.
Hand brake
The hand brake of this kart is
between the two seats. The
kart will be braked if you pull
upward the hand brake when
stopped and will be loosened if
you put down the brake.