K&F VIDA L Flying Frame, Руководство пользователя

Страница: 31 / 40

User's Manual K&F VIDA L Flying Frame
KLING & FREITAG GMBH © 2017 Version 1.6 Page 31 of 40
6. Dismounting a Flying Speaker Array
Warning
Risk of injury: Never disconnect speakers that are suspended or are installed by stretching!
Make sure that the connecting interface is unloaded before starting dismounting. Therefore,
always lower the speaker array onto the case bases or right into the case before operating
the connecting-pin lever!
Basically, dismounting the speakers is performed in reverse order of the installation process.
Caution
Do not apply excessive force when disconnecting speakers. If you have problems
disconnecting the speakers, try again at a more level place and/or shake gently.
If a second flying frame is mounted at the bottom of the speaker array, remove it before
lowering the bottom speaker into a transportation case.
Tip
When dismounting is completed, store all speakers and accessories in the transportation case.
This way, they cannot get lost and are always at hand when needed. In addition, the parts
are protected at least temporarily against the effects of unfavorable weather conditions, etc.
Note that you don’t need to move the connecting adapters of a VIDA L speaker back into
the housing after dismounting: The speakers are designed for fitting into their cases with
their adapters moved out, thus simplifying and shortening the dismounting process as well as
the next mounting process.
We recommend lowering the speaker array onto lined-up case bases and afterwards
disconnecting them.
6.1 Dismounting onto Case Bases
1) Place the base of a fully open
VIDA L case below the speaker
array.