© KLING & FREITAG GMBH
Version 1.0
Page 33 of 35
User's Manual
K&F
SPECTRA 212i Configuration Accessories
12
Maintenance
•
Perform a visual inspection before each installation.
•
Visually inspect the entire setup every six months.
•
When performing those checks, particularly look for deformations, cracks, dents, damage
to threads, and corrosion. Also check slings and lifts (e.g. shackles, chains, and steel ropes)
carefully for wear and deformation.
•
Many countries require regular inspection of mounting components and accessories. An
additional annual inspection is typically required to be performed by a technical expert.
Moreover, a legally certified or official authority must perform a detailed inspection every
four years.
•
Therefore, be sure to maintain an inspection log. Enter the values determined for each
speaker and accessory during the periodic checks into this log. This way, relevant data are
always at hand in case of inspection. This inspection log book shall be updated with the
inspection steps, test intervals and parts lists.
•
If necessary, use multifunction oil for care.
12.1
Transportation and Storage
This product is protected against the effects of temporary humidity and moisture, etc. Never-
theless, be sure to store, transport, and use it in dry
Make sure that the system is adequately ventilated during longer storage periods so any resid-
ual moisture can escape from the equipment.
In addition, make sure that the prpduct is protected from mechanical strains in order to prevent
damage.
To protect the speaker from the above impacts, we recommend using suitable transport and
storage equipment.
12.2
Disposal
Dispose of this product according to local ordinance regulations.
WARNING
Risks imposed by undetected damages
•
The inspection must be carried out by a qualified expert.
•
If as a result of these checks any uncertainty should arise with regard to safety or defects
are found, don’t use the speaker any longer. Contact your retailer.
•
Be sure to use self-locking screws no more than five times. Using them more often may
result in screws loosening in operation. If in doubt, use new screws. Never use other types
of screws.
•
All repair work must be performed by Kling & Freitag after evaluation carried out by
engineering.
