K&F SPECTRA 212, Руководство пользователя

Страница: 21 / 38

© KLING & FREITAG GMBH Version 1.5 Page 21 of 35
User's Manual
K&F SPECTRA 212
If you want to use the K&F SPECTRA 212 as a line source in combination with a subwoofer, be sure to
configure the VariQ unit properly. Select the appropriate preset on the K&F SystemAmp or K&F System-
Rack. Whenwiring your system, be sure to assign the channels correctly (see page 19).
Presets:
Suggested configurations include:
Presets:
8.2 Setup 2: 1× K&F SPECTRA 212 point source with additional
subwoofer
K&F SystemAmp: SPECTRA 212 PS LCut
To ensure optimum load distribution on the K&F SystemAmp, we
recommend using channels 3 and 4 for the K&F SPECTRA 212 and
channels 1 and 2 for the subwoofers.
K&F SystemRack: Spec212 PS LC
By default, the crossover frequency between the subwoofer and
the top is 100 Hz. If you prefer a lower frequency (for example, the
subwoofer and the top will be located relatively far apart from
each other), you might want to select the full-range mode for the
K&F SPECTRA 212 while feeding the subwoofers in 60-Hz mode.
(1x)
K&F SPECTRA 212
(Point Source) (1x)
K&F SPECTRA 212
(Point Source)
(1x)
K&F NOMOS LT (1x)
K&F NOMOS XLT
(1x)
K&F NOMOS LS2 (1x)
K&F NOMOS XLS
8.3 Setup 3: 2× K&F SPECTRA 212 line source in full range mode
K&F SystemAmp: SPECTRA 212 LS FR
With a cluster of 2 setup, enable the switchable Cluster of 2 filter
in the Input EQ of the K&F SystemAmp.
K&F SystemRack: 2xSpec212 LS FR
2010
mm
2180
mm