This documentation covers breakpoints, emulator use and much more. If you have any
questions about the JTAG AVR, the answer should be in these files.
Connecting the JTAG AVR hardware.
•
Connect the serial lead to the PC and the JTAGAVR main board
•
Connect Adapter A (the one with the big letter A on it) to the JTAGAVR using 10-
way lead – not lead marked ISP only
•
Plug the adapter into the 10-way header labeled Port C on STK200 and AVR-TRAIN
or Port F Analog Port on STK300
, with the connectors facing inwards.
•
Power the board
To PC Serial Port
AVR
Port C
on STK200
A
ICE
10-way lead
NOT ISP only lead
Analog Port F
on STK300
STK300ICE Only
The AREF Pot should be turned
fully anticlockwise, as the JTAG
pins are on the Analog header.
This only has AREF pin not
Vcc, so turning pot gives 5V on
pin.