Aetos User’s Manual
8.1
Updating with USB Stick
8.1.3
Performing the Update
Once the update file is on the USB stick follow the steps below:
1. Insert the USB stick with the update file into USB port.
2. Select
Options
from the main menu and then select the
Update
icon and
confirm the decision. Aetos will restart in special update mode.
3. Upon restart a window similar to Figure 44a opens. Select the
Update
option.
4. A window similar to Figure 44b opens with kus files listed. Normally,
only one file is listed. Select the update file (kus file) and push the knob.
The update process is now started.
(a)
Aetos update mode options.
(b)
Update file selection.
Figure 44:
Special update mode example.
Once update process has been started, do not cancel or terminate it. Make
sure that battery is sufficiently full. The update process may take a few
minutes.
The update process will automatically perform the following steps:
The update file integrity is verified. In the case of
Update file checksum
ERROR
message, it usually means that the file was corrupted and it
must be downloaded again. In most cases, forgetting to
safely remove
the USB stick from PC is to blame.
Files stored inside the update file are copied into Aetos. Once this is
completed, Aetos restarts.
63
©
Kanardia
2020
Содержание Aetos
Страница 1: ...AETOS User s Manual Kanardia d o o March 2020 Release for software version 3 6...
Страница 2: ......