Kanaad MOTO CHARGER MC-1 Скачать руководство пользователя страница 3

Страница: 3 / 4

www.kanaad.com

HOW TO CHARGE BATTERY

Remove battery from charger.

Plug mains input(230Vac)and start charger.

Connect battery to charger with proper polarity.

Set battery AH/Current using selection knob.

Wait until charger shows 100% battery charge.

If every thing goes right, Charging indication will
be shown on BARGRAPH.

Содержание MOTO CHARGER MC-1

Страница 1: ...MC 1 MC 2 MC 4 www kanaad com 1 OPERATING AND INSTRUCTION MANUAL KANAAD ELECTROMATION SOLUTIONS PVT LTD...

Страница 2: ...REVERSE Polarity Slow Blink means OPEN Terminals Fast Blink means SHORT Terminals ON means FUSE Blown Not OK OFF means FUSE OK FUSE BLOWN LED Indication Battery Connection Cable 1 meter Length with V...

Страница 3: ...charger Plug mains input 230Vac and start charger Connect battery to charger with proper polarity Set battery AH Current using selection knob Wait until charger shows 100 battery charge If every thin...

Страница 4: ...s clean and dry for proper contact Confirm correct and tight connections Select proper charging current www kanaad com 4 PROBLEM CAUSE FINDINGS Battery not charging Charger does not start Check all in...