6
Kamstrup A/S • 55121600_A4_GB_03.2015
MULTICAL® 6M2
2.2 Short direct temperature sensor pair
The short direct sensors can be mounted in special ball valves or
in special tee-pipes, both with threads up to R1 and built-in M10
union for the short direct sensor.
For mounting in existing installations with standard angle tees
Kamstrup A/S can, furthermore, supply R½ and R¾ brass nipple
fittings for the short direct sensors.
Fasten the sensor’s brass unions lightly (approx. 4 Nm) using a
12 mm face wrench and seal the sensors with seal and locking
wire.
2.3 Temperature sensor pair in cooling applications
Temperature sensors in cooling applications must be mounted
from below as shown in the figure.
