Kamstrup MULTICAL 602, Инструкция по установке и эксплуатации, Страница: 17 / 24

15
9.1.10 sIOX module (Auto detect Baud rate), type 602-00-64
SIOX is used for data reading of small and medium-sized groups of heat meters via
cable, the data readings being presented by the main system, e.g. Mcom, Fix or
Telefrang. Further information on these systems can be ordered from the supplier in
question. Furthermore, a configuration tool is available from Telefrang.
The two-wire serial SIOX bus connection is optoisolated from the meter and is
connected without regard to polarity (i.e. the polarity is unimportant). The module
is powered by the SIOX bus. Communication speed between 300 and 19,200 baud.
The module automatically uses the highest possible communication speed. The
module converts data from KMP protocol to SIOX protocol.
9.1.11 GsM/GPRs module (GsM6H), type 602-00-80
The GSM/GPRS module functions as transparent communication path between
reading software and MULTICAL® 602 and is used for data reading. The module
includes an external dual-band GSM antenna which must be used. The module
itself includes a number of light emitting diodes indicating the signal level, which
are very useful during installation. The GSM/GPRS module must be used together
with high-power mains supply (230 VAC: 602-00-00-2 and 24 VAC: 602-00-00-3).
9.1.12 Ethernet/IP module (IP201), type 602-00-82
The IP module functions as transparent communication between reading software
and MULTICAL® 602 and is used for data reading. The Module supports both
dynamic and static addressing. This is specified in the order or selected during
subsequent configuration. The module has no built-in security and must, therefore,
always be used in connection with a firewall or NAT. The Ethernet/IP module must
be used together with high-power mains supply (230 VAC: 602-00-00-2 and 24
VAC: 602-00-00-3).
9.1.13 High-Power Radio 2 pulse inputs (VA, VB), type 602-00-84
The High-Power RadioRouter module has built-in router functionality and is
thus optimized to form part of a Kamstrup radio network, the read data being
automatically transferred to system software via the network unit RF Concentrator.
Furthermore, the module can be read by Kamstrup’s hand-held reading systems,
e.g. USB Meter Reader and MT Pro.
The RadioRouter module is available for operation in both licence-free and licence
demanding frequences permitting a transmitting strength of up to 500 mW. The
module is by default fitted with internal antenna, connection for external antenna,
and two extra pulse inputs. The High Power RadioRouter module (602-00-84) must
be used together with the High Power mains supply (230 VAC: 602-00-00-2 and
24 VAC: 602-00-00-3).