MAXICAL
®
III
5511-229 GB/98.06/Rev. B1
48
12. Sealing
All verified meters are sealed subsequent to installation. Meters
may also be sealed for other reasons. The integrator, flow part and
temperature sensors are all sealed independently to ensure that
legal measuring data is not tampered with.
Place MAXICAL
®
III in a separate panel section, so that the front
lid can be locked and sealed with thread and a plastic seal.
Panel doors with both sealable snap locks and sealing screws can
be used.
MAXICAL
®
III’s front panel has a void-label - placed by
Kamstrup A/S - which prevents tampering.
Temperature sensors with DIN-heads, shape B, can be sealed as
shown below. The seal ensures that the top cannot be removed.
If sensor pockets are used in addition to sensor tubes, these too
must be sealed.
The flow meter should be sealed as prescribed for the type in
question.
