27
Kamstrup A/S • 55122714_A2_GB_04_2021
flowIQ® Gateway
"SETUP loop"
Flow
Forced call via front keys
"SETUP loop"
Total reset
Radio on
Radio off
7.1.2 Activation and deactivation of radio
If the gateway's radio communication is switched off via "SETUP loop", the gateway
subsequently switches on the radio communication again when the connected
flowIQ® 2200/3200 meter registers water flow.
The symbols for radio on/off indicate whether the gateway allows radio communication,
not whether a radio module has activated its radio communication. Please be aware of
this when troubleshooting the gateway's wireless communication.
The gateways radio/wireless communication is automatically turned on when the gateway leaves
the transport mode. The radio on/off function in the "SETUP loop" index “3-015” is primarily used
for switching on the radio in transport state as well as for switching off the radio when the gateway
is dismounted after having been in operation, e.g. if the gateway is to be sent by airfreight. The
gateway's present radio state is indicated by two symbols in the bottom left corner of the display.
Radio ON
Radio OFF
No module/not radio
module
"SETUP loop"
"USER loop"/
"TECH loop"
7.2 Configuration of communication module(s)
Communication modules are ordered from the factory with a specified data package content and
configuration.
The modules can be reconfigured using METERTOOL HCW with a optical read-out head with USB
connection.
