7
Wall Convectors
1.26
Wall models with PowerKon heat exchanger
Installation manual
4.3 Fitting Wall Casing
G
Place the wall casing with the valve recess so that it fits over the wall
brackets and the heat exchanger as shown in Fig. 7. Ensure that the
spacing dimensions are adhered to, as listed in Fig. 8 on page 8.
G
Then fit the thermostatic valve head type 110210
5
as per Fig. 5.
Fig. 7: Fitting the
wall casing
Fig. 6: Dimensions of water connection
Wall casing depth 70 mm:
Wall casing depth 120 mm:
Wall casing depth 170 mm:
Wall casing depth 220 mm:
1
2
1
2
1
2
1
2
1
Flow connection 1/2”
2
Return connection 1/2”
Example shows
perforated profile
Example shows linear grille
with C-profile
Example shows linear
grille with C-profile
Example shows
perforated profile