2
1.26
Encased convectors
Encased models with heat exchangers
Installation manual
1.26
1.46
1. Correct and proper use
Kampmann Po F encased convectors have been
designed and manufactured in accordance with state-of-the-art
engineering and recognised safety regulations. There is
nevertheless a risk to persons and property, including damage to
the equipment itself, if the equipment is not fitted, operated
and used properly.
Po F encased convectors should only be used indoors,
that is to say, in private property, offices and exhibition rooms for
example. This equipment is not suitable for use in damp areas,
such as swimming pools or outdoors. The equipment should be
prevented from becoming wet during installation. If in doubt
please contact the manufacturer. Any use not mentioned above
will be deemed to be incorrect and improper and any damage
resulting from this will be the sole responsibility of the
operator/user of the equipment. Correct and proper use is also
deemed to include adherence to the installation instructions
included in this manual.
The installation of this equipment requires some technical skill
and expertise in the field of heating, cooling and ventilation.
This knowledge is generally gained in vocational training in
heating, cooling and ventilation and is not described in detail
here. Any damage resulting from improper installation is the
sole responsibiltiy of the user/operator of the equipment.
2. Safety instructions
The fitting, installation and servicing of electrical equipment
should only be carried out by a qualified electrician in
accordance with VDE (Association of German Electricians’)
regulations. The equipment should be wired in accordance with
current VDE electrical regulations and EVU guidelines.
Non-compliance wih the directives can lead to malfunction of
the equipment and possible damage and risk to persons and
property. There is a risk of fatal injury if the equipment is wired
incorrectly and wired are crossed!
All parts of the system should be disconnected from the mains-
before installation work or servicing is carried out and should be
prevented from being switched on again acccidentally.
