Kampmann 30277, Руководство по эксплуатации

Страница: 10 / 24

10
. 1.96 2-Stage, Three-Phase Controller
With Timing Switch and Room Temperature Controller, Type 30277
Operating instructions
2
Speed selector switch
The signal lamp indicates the current operating status of the equipment:
3
Operating mode selector switch
*If the speed selector switch is in the "Auto" position, the "Day" mode of operation is active..
4
Temperature setting, day mode
For setting the required room temperature during the "day mode" phase.
5
Night mode, temperature lowering setting
For setting the required temperature reduction during the night mode
phase.
6
Timing switch
For setting the times at which the day/night mode is switched over. For a
description of this, see timing switch operation (Chapter 4.1 ff)
Releasing the motor malfunction (thermal contact triggered)
A malfunction can be released via the zero reference position of the speed
selector switch. If the malfunction has not been eliminated, the
malfunction signal will reappear (see page 9).
0 Equipment turned off
1 Operation only in stage 1
2 Operation only in stage 2
auto
Automatic speed change-over regardless of the room temperature
set-point and actual value.
Day
Room temperature regulated to the day temperature which has
been set
Night
Room temperature regulated to the lower temperature which has
been set
Timer
The integrated timer switches over between the day temperature
and the lower temperature
Man * Continuous fan operation at the set speed level
Fig. 4: Setting the differential gap
Differential gap of the room temperature controller
If necessary, the differential gap (hysteresis) of the temperature controller
can be changed:
We recommend a setting of approx. +/- 1 Kelvin.
Fig. 5: Differential gap of the room
temperature controller
Hysteresis Switching frequency Control deviation
Small High Low
Large Low Large
X
RT
W
RT
. 1.96 2-Stage, Three-Phase Controller
With Timing Switch and Room Temperature Controller, Type 30277
Differential gap
(hysteresis)