Kampa Geyser, Инструкция по установке и эксплуатации

Страница: 16 / 144

16 4445103340
Troubleshooting
Warranty
The statutory warranty period applies. If the
product is defective, please contact the
manufacturer's branch in your country (see
kampaoutdoors.com/store-locator) or your
retailer.
For repair and warranty processing, please include
the following documents when you send in the
device:
• A copy of the receipt with purchase date
• A reason for the claim or description of the fault
Disposal
➤
Place the packaging material in the appropriate
recycling waste bins, wherever possible.
M
If you wish to finally dispose of the product,
ask your local recycling center or specialist
dealer for details about how to do this in
accordance with the applicable disposal
regulations.
Fault Possible cause Solution
Water will not flow from
shower head. The appliance is switched off. Switch on the appliance.
Water supply is insufficient. Provide sufficient water supply.
The water pump is not connected to the
appliance. Connect the water pump to the appliance.
DC power supply is not adequate. Provide adequate DC power supply.
The shower head switch is in “OFF”
position. Turn the shower head switch to “ON”
position.
Burner will not light. Water is not flowing from the shower head. Turn the shower head switch to “ON”
position.
The inlet water is over +50 °C warm. Let the inlet water cool down below
+50 °C.
The gas cylinder is turned off. Turn the gas cylinder on.
There is no gas in the gas cylinder. Exchange the gas cylinder.
Water is not hot enough. The inlet water is too cold. The appliance
can raise the water temperature by approx.
25 °C.
Recirculate the water until desired
temperature is reached.
The over-temperature safety appliance has
been triggered. Let the system cool down until the over
temperature safety switch opens.