User Guide
AIRBREAKPRO-UM-10-18
For Models:
AIR Break Pro 3 (WB0004)
AIR Break Pro 5 (WB0005)
Страница 1: ...User Guide AIRBREAKPRO UM 10 18 For Models AIR Break Pro 3 WB0004 AIR Break Pro 5 WB0005 ...
Страница 2: ...e This will allow you to familiarise yourself with the windbreak its set up and any limitations the windbreak may have for your particular use Introduction Information Fabrics can be weakened by prolonged exposure to sunlight Under normal holiday use your windbreak will give long service but use for extended periods in strong sunlight will soon cause deterioration In those cases it would be wise t...
Страница 3: ...e inflation valve on the central panel Unscrew the top cap and attach the pump nozzle see Image 3 4 Once inflated push or pull the AIR Break Pro up allowing the AirPoles to assume their correct shape see Image 4 5 Inflate the AIR Break Pro from the inflation valve The ideal inflation pressure is 9psi 0 62 bar Set Up and Take Down If you are using the AIR Break Pro freestanding skip Steps 1 and 2 1...
Страница 4: ...om the ends closest to the awning then continue to peg each corner down see Image 5 7 Clip on and peg out the external guy lines see Image 6 8 If you are using the AIR Break Pro freestanding clip guy lines onto both sides and peg down to secure its position Take Down 1 Deflate by turning the taps on the grey deflation valves located at each end of the AIR Break Pro see Image 7 2 Unpeg all pegging ...
