3. When using CATV splitter for 1 to many and many to many connection,
it is suggested to use low consumption, high isolation and shielding
5-1000Mhz bi-directional communication splitter to build video matrix.
7 FAQ
Q. It shows
“
NO SIGNAL
”
on screen?
A
：
1) Make sure to set TV source signal to the correct channel.
2) If LINK led is not on, check if TX and RX channel setting is the same.
3) If coaxial cable is too long, please refer to Appendix 1 to adjust
channel setting.
Q. Image is not normal after setting channel (splash screen, disturbance,
mosaic etc)?
A
：
Make sure coaxial cable connection is stable. Try other channel or reset RX.
Q
：
There is video image output but no sound?
A
：
Reset TX or re-up TX electricity.