Kambrook Steamline KIR795, Инструкция пользователя, Страница: 15 / 18

14
Using the Self-Clean Function
The Steamline Detach iron has a
self-clean function that is designed to
assist with the removal of scale and
impurities. This function helps to maintain
optimum performance of the iron. To use
the self-clean function:
• Fill the water tank to the MAX level
indicated.
• Set the temperature control dial to
MAX and the steam control switch to
NO STEAM.
• Place the iron on its heel, insert the
power plug into the power outlet and
switch on.
• Allow the iron to heat for two to five
minutes and reach the selected MAX
temperature.
• Switch the iron off and disconnect it
from the power outlet.
• Hold the iron horizontally over a sink,
push and hold the steam control
switch fully to the right to activate
the self-clean. Steam and boiling
water will emit from the holes in the
soleplate.
• Hold the iron in this position until all
water has dripped out of the water
tank.
NOTE:
Repeat the self-clean
process if the iron still contains
impurities.
CAUTION:
Only move the
steam control switch to
the right when you want
to activate the self-clean
function. Do not do this
whilst ironing. Boiling
water and steam will
drip from the holes on
the soleplate during the
cleaning process. Due
caution and attention
should be exercised.
Cleaning the Soleplate and
Exterior
Ensure that the iron is disconnected from
the power outlet and has completely
cooled before cleaning.
To remove residue that may have built
up overtime, wipe the soleplate and
steam holes with a damp cloth and dry
thoroughly with a soft dry cloth. For any
stubborn residues that still remain on the
soleplate, commercial soleplate cleaners
purchased from small appliance retailers
can be used.
To clean the outer housing of the iron,
use a soft damp cloth and polish with a
dry cloth.
NOTE: Never use abrasives or
scouring pads to clean the
soleplate of the iron. Avoid hard
contact with metal objects. Do not
scratch or damage the surface of
the soleplate.
NOTE: Do not use harsh or abrasive
cleaners on the surface of the iron.
Never immerse the iron in water or
any other liquid.
Care, Cleaning and Storage