11
Setting the Oscillation
This function will work in any mode.
Pressing the ‘OSC’ button will allow
the tower fan to oscillate from side to
side. To stop the unit oscillating, press
the ‘OSC’ button once more.
Setting the Auto-Off Timer
The timer function works in all
operating modes, and switches
the unit into standby mode after a
pre-set number of hours.
• Press the ‘TIMER’ button to
activate the timer settings.
• Press the ‘TIMER’ button to cycle
through the one hour increments,
up to 7 hours.
• The tower fan will then switch itself
to standby mode after the selected
number of hours has passed.
• The TIMER can be set on any of
the settings.
Using Your Kambrook Tower Fan
continued
Setting the Nature and
Reduction Mode
Your tower fan has a NATURE
and REDUCTION setting.
Both the NATURE and
REDUCTION modes can be
used on any fan speed. The LED
screen will indicate what mode
the fan has been set in.
Nature Mode
The NATURE mode simulates the
natural rise and fall of the wind
over time, with speed settings
automatically cycling between low,
medium and high.
At any fan speed setting, pressing the
MODE button once will turn the tower
fan into NATURE mode.
To turn the NATURE mode OFF, press
the MODE button twice, the fan will
now be in NORMAL operation mode.
Reduction mode
The REDUCTION mode allows you to
pre-select a variation in speed which
automatically decreases the fan
speed over time.
The REDUCTION mode applies in all
speed settings.
Once the fan speed is selected, press
the MODE button twice will turn the
tower fan into REDUCTION mode.
To turn the REDUCTION mode off,
press the MODE button once, the
fan will now be in NORMAL
operation mode.
NOTE:
When the NATURE mode
setting is selected, the tower fan is
programmed to
self-regulate through the various
fan speeds. The NATURE mode is
independent from the fan speed
settings while the LED screen will
still display the last selected fan
speed setting.
KTF840_841_WHT_IB_C18.indd 11
19/6/18 1:42 pm
