Kambrook KSB70 series, Инструкция пользователя, Страница: 9 / 20

8
To Use the Stick Mixer
Ensure the Stick Mixer is completely
and properly assembled as detailed
on page 7.
NOTE:
When blending in the
blending jug, do not exceed
600ml MAX marking.
1. Place the food to be processed
into the blending jug provided
(or a sufficiently large mixing
bowl or saucepan). The quantity
inside the blending jug should not
exceed the 600ml marking level
specified on the blending jug.
2. Insert the plug into a 230V or
240V power outlet and turn the
power on.
3. The Stick Mixer is equipped with
a Variable Speed Control Dial
located on top of the motor body
for more control over processing.
Turn the dial to the ‘MIN’ speed
and then, if required, adjust to
‘MAX’ speed setting depending
on what the recipe specifies.
4. With the Variable Speed Control
elected, place the blending shaft
as deeply as possible into the
blending jug and press and hold
the ‘ON’ button. The button must
be kept pressed for the duration
of operation.
5. With one hand work through
the ingredients in the jug with
a gentle raising and lowering
motion of the Stick Mixer, whilst
with the other hand hold onto
the blending jug for increased
control.
6. Once processing is complete,
switch OFF the power by releasing
the ‘ON’ button, switch off at the
power outlet and remove the
power plug from the outlet.
7. To avoid splashing, when
lifting the Stick Mixer out of the
blending jug ensure the motor
has completely stopped and the
blades have stopped rotating.
Always ensure the motor has
completely stopped before lifting
the blending shaft out of the jug.
NOTE:
The Stick Mixer has a
Variable Speed Control Dial
that adjusts speed from ‘MIN’
to ‘MAX’ depending on the
processing task. Turn dial from
a low ‘MIN’ speed up to high
speed of ‘MAX’ as required
(See Fig. 1).
Fig. 1
NOTE: When the ‘ON’ button
is pressed, the Stick Mixer will
operate at the speed selected
by the Variable Speed Control
Dial.
Operating Your Kambrook Stick Mixer
Continued...