9
8
Before First Use
Remove any promotional material
from fan.
NOTE:
Assembly of the fan requires
a Phillips head screwdriver
(not supplied).
WARNING:
When
unpacking the fan,
check to see you have
received all parts
before discarding the
packaging.
Assembling Your Kambrook
Pedestal Fan
Base and Pedestal Stand
assembly
1.
To connect the extension tube
to the anti-topple base, insert
the flange located on the end of
the extension tube into the ridge
on the top of the base, ensuring
that the tab on the flange aligns
with the tab slot located on the
anti-topple base (See Fig 1).
Fig. 1
Using Your Kambrook Pedestal Fan
2.
Insert the three butterfly screws
into the holes at the bottom
of the anti-topple base and
securely tighten them
(See Fig 2). Turn the unit back to
its upright position.
Fig. 2
3.
Unscrew the fastening screw
located on the back of the
pedestal stand bottom using a
screwdriver (See Fig 3).
Fig. 3
4.
To connect the pedestal stand
top and bottom together, align
the tab located on the upper
end of bottom pedestal stand
and the groove located on the
lower end of top pedestal stand
and press down (See Fig 4a).
Twist the top pedestal stand in
an anti-clockwise direction to
lock together, exposing the screw
hole at the back (See Fig 4b).
Fig. 4a
Fig. 4b
5.
Insert the fastening screw into
the exposed screw hole and,
using a screwdriver, tighten
securely into place (See Fig 5).
Fig. 5