8
To connect your controller, insert
the controller plug found at the end
of the power cord to the controller
connector on the throw.
Ensure that the plug is securely
fastened in the socket so that the
locking clips are fully inserted and
there is no gap between the plug
and socket (See Fig. 1).
Fig. 1
To Detach The Controller
Press and hold down the locking clips
(See Fig. 2).
Fig. 2
Pull the controller plug out of the
controller connector to detach.
Before First Use
Remove any promotional material
and packaging from the heated
throw.
The poly bag is reusable and can be
kept for safely storing the throw when
it is not in use.
The controller can be found
unattached and wrapped inside the
throw.
NOTE:
The heated throw is
designed to be reversible. Heat
will generate equally from either
side of the throw.
To Connect The Controller
The heated throw has a detachable
controller which allows the throw to
be machine washable.
Ensure the heated throw Power/Heat
Setting button is in the ‘OFF’ position
and not pressed.
Ensure the heated throw is not
connected to a 230V or 240V power
supply.
Using Your Kambrook Heated Throw
