Kambrook KHC100, Руководство пользователя

Страница: 2 / 4

KambrooK Safety
read all InStruCtIonS
before operatIng and Save
for future referenCe
Welcome to Kambrook and your new Hair
Clipper Kit.
At Kambrook we believe that the safe
performance of our products is the first priority
in any consumer product so that you, our valued
customer, can confidently use and trust our
products.
We ask that any electrical appliance that you use
be operated in a sensible fashion with due care
and attention placed on the following important
operating instructions:
Ensure that the power source to be used is the
same as the voltage requirements of the product.
Never immerse the power cord or the appliance
in any form of liquid and do not use near bath
tubs, basins or other vessels containing water.
This appliance is not intended to use by young
children or infirm persons without supervision.
Young children should be supervised to ensure
that they do not play with this appliance.
This hair clipper is for household use only, and
not for animal clipping or shearing.
The hair clipper may be plugged into any
230/240V power outlet. It should not be left
unattended when plugged in.
Always switch the hair clipper off then switch off
and unplug from the power outlet when not in
use and before cleaning.
Disconnect by gripping the plug and do not pull
the cord.
Do not place or store the hair clipper where it
can fall or be pulled into a bath tub or sink. If the
hair clipper falls into water, unplug it immediately.
Do not reach into the water.
The hair clipper has arcing or sparking parts
inside. Do not use in areas where petrol, paints,
aerosols, oxygen or other inflammable substances
are used or stored.
Keep the power cord and unit away from hot or
heated surfaces.
Do not pull, twist or wrap the power cord
around the casing, when using or storing the hair
clipper. Periodically check the cord for signs of
wear.
Do not operate the hair clipper if it has been
dropped or damaged in any manner.
regularly inspect the power cord, plug
and actual appliance for any damage. If
found damaged in any way, immediately
cease use of the appliance and return
the entire appliance to the nearest
authorised Kambrook Service Centre for
examination, replacement or repair.
please call 1300 139 798 for service
centre details.
Never drop or insert any object into any opening,
as this may cause an electrical hazard.
Always switch the hair clipper OFF before putting
down on any surface.
To avoid injury, do not use the hair clipper with a
damaged or broken comb nor with teeth missing
from the blades.
Use the hair clipper only as described in this
instruction book. The use of attachments not
recommended by the manufacturer may cause a
hazard.
Keep blades regularly oiled and clean blades after
each use.
If the appliance is connected to an extension
cord or power board then the extension cord or
power board should be positioned so that it is
not subject to splashing or contact with moisture.
The installation of a residual current (RCD)
is recommended to provide additional safety
protection when using electrical appliances.
It is also advisable that an RCD with a rated
residual operating current not exceeding 30mA
be installed in the electrical circuit supplying the
bathroom. Consult with your electrician for
professional advise.
featureS of your KambrooK HaIr ClIpper
Adjustable blade
control lever for
close trimming
and finishing off
(particularly around
the neck and ears)
On/Off switch
Easy hold grip
Blade guard – protects
blade when not in use
Barber’s scissors with
stainless steel blades
Barber’s comb – for
precise cutting control
Blade brush – for
cleaning the cutting
blades after use
Lubricating oil
– keeps blades in
optimal condition
Trim guide #4
for longer hair
Trim guide #3
for medium
- long hair
Trim guide #2
for medium hair
Trim guide #1
for short hair