![background image](http://html1.mh-extra.com/html/kambrook/keb415/keb415_instruction-booklet_651376010.webp)
9
Storing Your Controller(s)
Remove the controller(s) when
laundering your blanket. Store your
controller(s) during summer months
while your blanket remains on the bed
as a comfortable under blanket.
Dual Control Units
Your Double/Queen/King size heated
blanket features two controllers for
individual left and right side heating
comfort.
Turning Your Fitted Heated
Blanket On
Ensure the heated blanket controller
is switched to the ‘OFF’ position. Plug
the cord into a 230V or 240V power
outlet and switch the power on.
The Dream Collection heated
blanket range has 3 heat settings and
features an easy to use slide control
(See Fig. 6).
Fig. 6
To switch the blanket on, move the
switch in an upward direction to
the desired ‘LOW’, ’MED’ or ‘HIGH’
temperature setting. The On/Off
indicator light will illuminate while the
heated blanket is 'ON' in any of the
three heat settings.
The 3 settings allows you to choose
the right balance of heat depending
on your personal requirements:
- LOW
- MEDIUM
- HIGH
(recommended for preheating only)
NOTE:
Use the HIGH heat setting
to preheat only.
Turning Your Fitted Heated
Blanket Off
To switch the blanket off, slide the
switch to the 'OFF' setting. The On/Off
indicator light will not illuminate when
the heated blanket is 'OFF'.
NOTE:
On initial use, it is
recommended that the blanket
be set on HIGH for 3 hours
before sleeping on the bed.
This will assist in drying out
any moisture which has been
accumulated in the mattress.
You may notice an odour when using
the heated blanket for the first time
due to the insulation material. This is
harmless and will subside quickly.
It is not recommended that you sleep
with the heated blanket switched
on. Should you choose to leave your
blanket on all night, however, the
'LOW' heat setting should be used.