Kambrook KCE240, Инструкция пользователя

Страница: 9 / 16

8
Quick Start Guide
Turning the heater on
POWER
MODE
TEMPERATURE
TIMER
SWING
Plug the cord into a 230V or
240V power point and switch on. Switch the heater on using the
‘ON/OFF’ switch on the back of
the heater. Press the ‘POWER’ button to
activate heating. The heater
will be in low heat mode
(1100W) and the current room
temperature will appear on the
LED screen.
Setting the heating mode
POWER
MODE
TEMPERATURE
TIMER
SWING
POWER
MODE
TEMPERATURE
TIMER
SWING
POWER
MODE
TEMPERATURE
TIMER
SWING
Pressing the ‘MODE’ button
once will set the heater into
high heat mode (2000W). Pressing the ‘MODE’ button
twice will set the heater into
AUTO mode. Auto mode allows
you to adjust the temperature
settings to suit the desired
temperature. Pressing the ‘MODE’ button
three times will set the heater
into the FAN mode, and the
LED screen will show the current
room temperature. FAN mode
is for fan-only operation with no
output of heat.
Setting the variable temperature Setting the oscillation
POWER
MODE
TEMPERATURE
TIMER
SWING
POWER
MODE
TEMPERATURE
TIMER
SWING
POWER
MODE
TEMPERATURE
TIMER
SWING
To use the variable thermostat,
press the ‘MODE’ button twice
to set the heater into AUTO
mode (2000W). Set the desired temperature by
adjusting the ‘TEMPERATURE’
(+) to increase the temperature
and the (-) to decrease the
temperature. The heater will
now cut in and out to maintain
chosen ‘TEMPERATURE’. Pressing the ‘SWING’ button will
allow the heater to oscillate
side to side. To stop the
oscillation, press the ‘SWING’
button again.