13
NOTE:
If the Canister does not
easily fit in position, the filter
casing may be in the wrong
orientation. Do not force the
dust canister back into position.
NOTE:
Dirty and clogged
filters may result in reduced
suction performance. It is
recommended that filters are
cleaned after every use and
replaced regularly to ensure
maximum efficiency from
your vacuum. If filters are left
uncleaned, it may result in
reduction of suction power.
6.
To remove and clean the
CaptivG3 cone from inside the
dust container, firstly ensure the
dust container has been emptied.
Follow the ‘EMPTYING THE DUST
CONTAINER’ instructions.
Press the ‘PUSH’ button located
beneath the hose inlet connection
on the front of the dust container.
The bottom of the container will
release. Grip the two pockets at
the base of the cone with two
fingers, twist clockwise to ‘OPEN’
and pull to remove the cone.
Fig. 15
Fig. 16
Shake and tap the cone until
all the fine dust particles are
removed. The cone can also
be hand washed. Allow the
cone to completely air dry
before re-assembling.
To replace the cone into the dust
container, grip the two pockets
at the base of the cone with two
fingers, slide the cone into the
allocated bracket inside the dust
container and twist anti-clockwise
to ‘CLOSE’ until resistance is felt.