Kambrook KAM-KFA839GRY, Инструкция

Страница: 10 / 16

10
Turning Your Tower Fan On
To operate the tower fan, plug the
power cord into a 230V or 240V
electrical outlet and switch the outlet
on. Be sure the plug fits tightly as a
loose fit will cause overheating and
damage the plug.
Once the power outlet is switched
on, the fan is in ‘Standby’. When in
standby, the fan is not turned on but
the LED screen will illuminate displaying
the current room temperature only.
NOTE:
When the unit is plugged
into an electrical outlet and
the outlet is turned on, the
room temperature display will
illuminate on the LED screen
even though the tower fan is not
operating. This is Standby mode.
NOTE:
The tower fan is fitted with
a power saving feature. When
any of the 3 mode types are
selected or the timer function
is set, the LED display panel will
automatically switch off after
30 seconds, only displaying
the temperature dimly on the
screen. Press any key to turn the
display on again.
To turn the tower fan on, press the
‘POWER’ button once; the unit will
be in NORMAL fan mode at LOW
speed setting.
Setting the Fan Speed
The tower fan has three fan speed
settings; LOW , MEDIUM and
HIGH .
Pressing the ‘SPEED’ button once
will set the tower fan into LOW speed
setting.
Pressing the ‘SPEED’ button
twice will set the tower fan into
Medium speed setting.
Pressing the ‘SPEED’ button three times
will set the tower fan into
HIGH speed setting.
NOTE:
The SPEED indicator bar
on the control panel will flash
continuously during these cycles.
To turn the tower fan OFF, press the
‘POWER’ button and turn off at the
power outlet and remove the plug from
the power outlet.
Setting the Nature and
Reduction Mode
Your tower fan has a NATURE
and REDUCTION setting.
Both the NATURE and
REDUCTION modes can be
used on any fan speed. The LED
screen will indicate what mode
the fan has been set in.