manualshive.com logo in svg
background image

5

Important Safeguards For All  

Electrical Appliances 

•  Fully unwind the power cord before use.
•  Connect only to a 230V or 240V  

power outlet.

•  Do not let the power cord hang over 

the edge of a bench or table, touch 

hot surfaces or become knotted.

•  To protect against electric shock, 

do not immerse the power cord, 

power plug or appliance in water or 

any other liquid or allow moisture to 

come in contact with the part, unless 

it is recommended in the cleaning 

instructions.

•  The appliance is not intended for use 

by persons (including children) with 

reduced physical, sensory or mental 

capabilities, or lack of experience 

and knowledge, unless they have 

been given supervision or instruction 

concerning use of the appliance by  

a person responsible for their safety.

•  Children should be supervised to  

ensure that they do not play with  

the appliance.

•  It is recommended to regularly  

inspect the appliance. To avoid a 

hazard, do not use the appliance if 

power cord, power plug or appliance 

becomes damaged in any way.  

Return the entire appliance to the 

nearest authorised Kambrook service 

centre for examination and/or repair.

•  Any maintenance other than cleaning 

should be performed at an authorised 

Kambrook Service Centre.

•  This appliance is for household use only. 

Do not use this appliance for anything 

other than its intended use. Do not use 

in moving vehicles or boats. Do not use 

outdoors. 

Misuse may cause injury.

•  The installation of a residual current 

device (safety switch) is recommended 

to provide additional safety protection 

when using electrical appliances. It 

is advisable that a safety switch with 

a rated residual operating current 

not exceeding 30mA be installed in 

the electrical circuit supplying the 

appliance. See your electrician for 

professional advice.

•  Always turn the appliance to the OFF 

position, switch off at the power outlet 

and unplug at the power outlet when 

the appliance is not in use.

•  Before cleaning, always turn the 

appliance to the OFF position, switch 

off at the power outlet, unplug at 

the power outlet and remove the 

power cord, if detachable, from the 

appliance and allow all parts to cool.

•  Do not place this appliance on or near 

a heat source, such as hot plate, oven 

or heaters.

•  Position the appliance at a minimum 

distance of 20cm away from walls, 

curtains and other heat or steam 

sensitive materials and provide 

adequate space above and on all 

sides for air circulation.

Содержание Arctic KFA715













Отзывы: