CAUTION: Do not operate on an
inclined surface. Do not operate unless
the element is fully immersed. Do not
move while switched on.
Failure to observe these cautions
may result in damage to the kettle.
Maintaining Your
Kambrook Aquarius Kettle
Safety Boil Dry System
Your Kambrook Aquarius Kettle is fitted
with a safety device that protects against
overheating should the kettle be operated
with insufficient water. In this instance, the
kettle will immediately cease heating.This
feature will turn the kettle off and allow
the kettle to cool before further
operation.The device will automatically
reset itself when the unit has cooled
sufficiently.
Thermal Cut-out
This feature has been built into your
Kambrook Aquarius Kettle. In the event
that your kettle does malfunction this
feature will prevent overheating.This
safety feature will automatically shut down
the kettle to prevent further damage (and
usage). If this does occur, please take your
kettle to an authorised Kambrook Service
Centre.
Cleaning
Always switch off at the power outlet and
then unplug before cleaning, moving or
storing the appliance.
WARNING! NEVER IMMERSE
THE KETTLE, POWER BASE,
CORD OR PLUG IN WATER OR
ANY OTHER LIQUID
Additionally ensure that moisture does
not come into contact with cords,
plugs, kettle or power base.
Interior Cleaning
Removal of Mineral Deposits
Mineral deposits in the water may cause
the kettle interior to discolour.
This may be removed using a Kettle
De-Scaler available form most
supermarkets and hardware stores.
Alternatively you can make your own
solution. Fill the kettle with 3 cups of
white vinegar and the remainder with
water and allow to stand overnight.
DO NOT BOIL. Empty the solution from
the kettle. Fill the kettle again with clean
water, bring to the boil and discard water.
Repeat and the kettle will then be ready
for use.
Exterior Cleaning
Always ensure that the power is switched
off and unplug the kettle from the
power outlet prior to cleaning.
The exterior of the kettle can be cleaned
with a damp cloth and then dried
with a dry clean cloth.
Do not use abrasives, harsh cleaning
solutions or hard brushes for cleaning
as these may scratch and damage the unit.
5
