Kamasa-TOOLS K 10640 Скачать руководство пользователя страница 8

8

LED LIGHT ON THE CHARGER

 

Power On (Green light flashes slowly)

 

Battery low (Red light stays illuminated)

 

Battery charged 80% (Green light flashes rapidly)

 

Battery charged 100% (Green light stays illuminated)

 

Battery pack temperature is too hot or too cold (Red light flashes slowly)

 

Battery pack malfunction (Red and Green lights stay illuminated)

1  Charger shall be plugged into a 100-240V a.c outlet only.
2  If the battery pack is too hot or too cold, the charger will not fast charge the 

battery pack and the red Indicator light is “blinking”. When the battery pack 
temperature returns to between 0°C and 50°C, The charger will automati-
cally begin charging.

3  If both red and green indicator lights are “ON” the battery pack either does 

not comply or is defective. Please contact your retailer.

4  Do not charge the battery pack in rain, snow or high temperature environ-

ment.

5  Do not charge battery pack when temperature is below 10°C(50°F)or above 

40°C(104°F).

6  While charge the cool battery pack (below 5°C) in the warm indoor, keep the 

battery pack in the room for one hour to warm up before starting the battery 
pack. A cool battery may charge unsaturated. 

7  Remove the plug after finishing the charge.
8  The charger should be cooled at least one hour after continue charging three 

times.

9  Do not use generator for charging the battery pack. 

Содержание K 10640













Отзывы: