3
PRODUCT SAFETY INSTRUCTIONS
1 Disconnect battery pack from tool or place the main switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventa-
tive safety measures reduce the risk of starting the tool accidentally.
2 Remove adjusting keys or wrenches before turning the tool on . A wrench or a key
that is left attached to a rotating part of the tool may result in personal injury.
3 Use clamps or other practical way to secure and support the work piece to a stable
platform. Holding the work by hand or against your body is unstable and may lead to
a loss of control.
4 Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools,
with sharp cutting edges are less likely to bind and are easier to control.
5 Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may create a risk of injury when used
on another tool.
IMPORTANT SAFETY INSTRUCTIONS
FOR CHARGER & BATTERY PACK
1 Caution: To reduce risk of injury, charge only specific type rechargeable battery packs.
Other types of battery packs may burst causing personal injury and damage.
2 Before using charger, read all instructions and cautionary markings on battery packs and
chargers.
3 Do not expose charger to rain or snow.
4 To reduce the risk of damage to electric plug and cord, pull by plug rather than cord
when disconnecting charger.
5 Use of an attachment not recommended or sold by the charger manufacture may result
in a risk of fire, electric shock, or injury to persons.
6 Make sure cord is located so that it will not be stepped on, tripped on, tripped over, or
otherwise subjected damage or stress.
7 Do not operate charger with damaged cord or plug. Replace them immediately.
8 Do not operate charger if it has received a sharp blow, been dropped, or otherwise dam-
age in any way, take it to qualified center.
9 To reduce risk of electric shock, unplug charger from outlet before attempting any main-
tenance or cleaning. Turning off controls will not reduce this risk.
10 Do not disassemble charger or battery pack, take it to a qualified service center while
repair is required. Incorrect reassembling may result in a risk of electric shock or fire.
