Gibraltar )*++ ,eries Hardware
A)
B)
C)
D)
E)
F)
G)
H)
A)
B)
C)
D)
E)
F)
G)
Remove cardboard and plastic cover
from pedal board.
Insert the beater ?SC-LBDB) into the
beater holder ?GP-6064) and adGust it to
your desired height.
Insert the pedal spring ?SC-0052) onto
the spring cam roller ?GP-0051) using
the clip attached to the spring.
To adGust the spring tension to your
desired response, loosen both upper
and lower finger nuts to increase or
decrease the tension, then re-tighten the
finger nuts.
Slide the pedal frame onto the bass
drum hoop then tighten the hoop clamp
?GP-6065) onto to the bass drum hoop.
To avoid pedal slippage and bass drum
movement, we recommend placing the
bass drum and pedal onto a carpeted
surface.
Lubricate metal-to-metal contact points
periodically to insure smooth operation.
We suggest RSC-GLO Gibraltar Pedal
Lubricant.
2eplace5ent 7art 8u5bers
1 - SC-LBDB Light Weight BD Beater
2 - GP-6063 Single Chain Cam
3 - GP-6064 Beater Holder
4 - SC-0121 Key Screw 8mm
5 - SC-0129 Key Screw 6mm
6 - GP-4072 Spring Cam Assembly
7 - GP-0051 Spring Cam Roller with Screw
8 - GP-0052 Pedal Spring
9 - GP-0053 Spring Tension Assembly
10 - GP-6010 Single Chain Assembly
11 - GP-6033 Pedal Board Complete
12 - GP-0020 Anchor Spur Assembly
13 - GP-6065 Black Hoop Clamp
14 - GP-6066 Hoop Clamp Key Screw 8mm
15 - GP-4018 Radius Rod Assembly
16 - SC-0128 Fastening Screw 5mm
17 - SC-0129 Fastening Screw 6mm
18 - GP-0067 Connecting Rod w/ U-\oint
19 - GP-0066 Connecting Shaft w/ U-\oint
20 - GP-6067 Fi]ed Rock Plate
Check out the entire line of
Gibraltar Hardware products at …
www@GibraltarHardware@co5
1
3
2
5
4
6
7
8
9
11
13
12
14
10
1
3
14
2
10
2
4
6
7
8
9
11
11
12
15
16
17
18
19
16
,etup Anstructions
)*BB ,eries ,inCle 7edal
,etup Anstructions
)*BBDE ,eries Double 7edal
Remove cardboard and plastic cover
from pedal boards and attach the
Radius Rod ?GP-4018) to the primary
frame.
Insert the connecting rod assembly
into the right and left a]les on each
end of the pedal frames. AdGust the
e]tension rod to the desired length.
Insert the beaters ?SC-LBDB) into the
beater holders and adGust to the
desired height.
Insert the pedal spring ?SC-0052)
onto the spring cam roller ?GP-0051)
using the clip attached to the spring.
To adGust the spring tension to your
desired response, loosen both upper
and lower finger nuts to increase or
decrease the tension, then re-tighten
the finger nuts.
Slide the pedal frame onto the bass
drum hoop then tighten the hoop
clamp ?GP-6065) onto the bass drum
hoop.
To avoid pedal slippage and bass
drum movement, we recommend
placing the bass drum and pedal onto
a carpeted surface.
Lubricate metal-to-metal contact
points periodically to insure smooth
operation. We suggest RSC-GLO
Gibraltar Pedal Lubricant.
20
20
