KAM VECTOR6, Инструкция по эксплуатации

Страница: 6 / 8

1. Master/Slave operaton
You can link multiple units together in Master/Slave mode. To achieve this you will need to set the first unit in the chain as the
Master unit and then set all other linked units as Slave units.
Using DMX cables, link the units from the DMX output of the first ( Master ) unit to the DMX input of the second ( Slave ) unit, then
link the DMX output of the second unit to the DMX input of the third unit and so on.
Next set the first unit to be the
Master :
1.
Press the Menu button and choose SLnd
2. Press the Enter button
3. Set the unit to NASt
4. Press the Enter button to confirm your choice
5. Next set the unit to Show mode Shnd (and choose a show (0-16)
Next set the other units to be Slave mode :
6.
Press the Menu button and choose SLnd
7. Press the Enter button
8. Set the units to SL1 (normal Slave mode) or SL2 (dual light show mode)
9. Press the Enter button to confirm your choice
All unit should now operate in Master/Slave mode where all units operate the same show as the first unit in the chain. If you are
only joining two units in Master/Slave mode, it is reccomended to us
SL2 Slave mode.
2. DMX controller operation
If you intend to operate the unit using a DMX controller, then you need to begin by setting the address. Choose A001 as the
default address. Below are the DMX channel function tables for each DMX mode.
6 channel DMX mode
Channel Value Function
1 000-255 Full dimmer 0 - 100%
2 000-255 Strobe, slow to fast
3
000-007 No function
008-022 Show 1
023-037 Show 2
038-052 Show 3
053-067 Show 4
068-082 Show 5
083-097 Show 6
098-112 Show 7
113-127 Show 8
128-142 Show 9
143-157 Show 10
158-172 Show 11
173-187 Show 12
188-202 Show 13
203-217 Show 14
218-232 Show 15
233-247 Show 16
248-255 Sound-to-Light mode
4 000-255 Show mode speed adjustment, slow to fast
5
000-014 Static LED colour change Show
015-255 Colour chase
6 000-255 Colour chase, slow to fast