STEP 7
Attach the top two long braces to the right side panel using the
smaller nuts and bolts, threading them through the right side
panel first making sure that the washer is on the top brace side.
BACK
BACK
STEP 8
Locate the square end frame.
BACK
STEP 9
Attach to the ends of the top long braces using the top through
holes and the last smaller nuts and bolts making sure you
thread them through the square end first.
STEP 10
Locate the long middle brace.
B
A
C
K
STEP 6
Locate the two top braces for the table.
B
A
C
K
STEP 5
Attach the top panel (no bolts/screws needed).
BACK