28
OODMANUAL 0720
KAM CONTROLS, INC.
3.
Type the command “!modbus" and click on "Send ASCII" to enable Modbus. Modbus status will change to
"Enabled" confirming the change. FIG. 4-11.
O P E R AT I O N C O N T I N U E D
FIG. 4-11
4.
Power cycle (turn off and on) the OOD to start the Modbus communication.
5.
To disable Modbus, use the same command “!modbus" and click on "Send ASCII." Modbus status will change to
"Disabled" confirming the change.
