Using Mp3 playback
(only available on RZ V1 active speakers)
The Mp3 player supports WMA or Mp3 files
1.
Insert USB stick
2.
Turn on Mp3 player power (17)
3.
Use the previous / next track buttons to select desired track
4.
Press play button
5.
Use the
button to select the repeat mode function. This will show in the LCD display.
Please note this is for a USB memory stick and will not read from mobile phone or hard drive devices. It will not
charge USB devices.
RZ15A Sub and RZ18A Sub
The RZ15A and RZ18A Subs are active bass enhancement speakers. They can be used to accompany your RZ
active full range speakers.
Connecting the RZ15A/18A Sub to a mixer
1.
Connect a cable either
¼
jack (6.35mm) or a balanced XLR lead to your mixer output.
2.
Connect the other end of the leads to the audio input sockets on the RZ15A/18A Sub (6 or 7).
Connecting the RZ15A/18A Sub to active full range speakers
1.
Follow the steps above to connect your mixer.
2.
Connect a balanced XLR lead from the line output sockets (3) to the line input socket of the active speaker, one
for the left and one for the right active speaker.
The RZ15A/18A Subs have a built in amplifier to run your passive satelite speakers.
Connecting the RZ15A/18A Sub to passive full range speakers
1.
Follow the steps above to connect your mixer.
2.
Connect a speakeron lead from the speaker output sockets (8) to the input socket of your passive speaker, one
to the left passive and one to the right passive.
3.
Make sure your passive speakers are compatible with the wattage and ohmage of the built-in amplifier.
This output must not be connected to an active speaker as this will severly damage the unit and your amp.