Making connections to your portable PA
Always ensure that volume controls on your PA are turned to zero and that its power is switched OFF when making connections.
Use appropriate cables.
Please read the rest of this manual before turning on the power or adjusting the volume controls.
Connecting via Bluetooth
To connect your Bluetooth enabled smartphone or MP3 player, ensure that your device and your RZ V3 Portable PA are both
switched ON and that Bluetooth is running on your device.
On the portable PA, press and hold the
Mode
button on your media player until you see four dashes (
- - - -
) and a small Bluetooth
logo, these will both flash on and off until you are connected. The Portable PA is now ‘discoverable’. In the Bluetooth settings of your
device (smartphone, tablet, etc), search for the Portable PA in the list of available devices, the Portable PA will appear under the
name ‘
Bluetooth
’. Once you have chosen this option you should now be connected via Bluetooth to the Portable PA. Play some
music on your audio device and adjust the volume on the PA until you hear the signal. Congratulations you are now connected via
Bluetooth!
On most Bluetooth enabled phones and MP3 players after you have paired the device once with the PA, your device will ‘remember’
the PA and connect whenever the PA is discoverable (see above).
If asked, the default password for the PA is:
0000
Kam RZ12A V3 & RZ15A V3 Portable rear panels
1.
SD/MMC card input
2.
Media player control (including Mode button for Bluetooth connection)
3.
USB input (memory stick)
4.
Master output volume control
5.
Bass EQ adjustment
6.
Treble EQ adjustment
7.
Echo control
8.
Microphone/Guitar volume control
9.
Voice/Talk Over switch (dips the music volume music when using mics)
10. Mic 1 / guitar - 6.35mm jack input
11. Mic 2 - 6.35mm jack input
12. AUX audio input (smart phones, MP3 players, etc)
13. RCA phono line inputs
14. RCA phono line outputs
15. Wireless mic signal indicator LEDs
16. Wireless mic volume controls
17. VHF wireless system on/off power button
18. Antennas for VHF wireless mic system
19. 12 volt DC output connection
20. Fuse socket
21. Power On / battery charging indicator LEDs
22. Mains power switch
23. IEC mains power input
